User guide

Configuring Network Services Profile Management
454
AlliedView NMS Administration Guide
6.10.13 Multiple VC Support on ADSL Port
As part of configuring the iMG/RG, there is the option of datafilled multiple VCs for the ADSL connection. This is explained
in 7.5.9.
6.10.14 Multiple VC Support on SHDSL Port
In NMS release 11.0 SP4, the SHDSL Profile allows the user to configure up to four VCs.
6.10.15 Multiple VC Support on VDSL Port
6.10.15.1 Overview
On the iMAP, there has been support for provisioning multiple VCs for the VDSL A/B cards in ADSL or VDSL mode over
ATM. However, this was not supported on the NMS. In NMS release 11.0 SP4, this feature is added.
Like the ADSL24A/B, the VDSL24A/B cards support the provisioning of VCs as long as the port is running ATM in either
ADSL or VDSL mode. Up to 4 AAL5 VCs per ATM interface can be configured with different VPI/VCI pairs. Moreover, the
same rules apply for the VDSL24A/B card as with the other ADSL cards that support multi-VCs (sub-interface zero is
created by default and cannot be destroyed).
Prior to this feature, only one VC could be provisioned on the VDSL port when it was operating in ADSL or VDSL mode
over PTM.
Messages are added to the GUI so that the administrator is informed when the transport mode is set to PTM, VCs cannot be
provisioned. This and the other GUI changes are explained below.
6.10.15.2 Create/Modify VDSL Profile
The Create VDSL Profile is changed so that when the transport mode is set to ATM.there is the option to data fill up to four
VCs. (VC 0 always exists and cannot be deleted.) Refer to the following figure.