User guide

Configuring Network Services Profile Management
439
AlliedView NMS Administration Guide
6.10.1.2 Profile Names and Scoping
Profile Scoping is a concept that allows for error-free provisioning, since it ensures that for a Profile only certain devices can
be selected, or that for a device only certain Profiles can be selected. This concept is used extensively when provisioning
iMGs, and complete examples are shown in Section 7.
Relearn x
Intrusive Action x
Multicast limit x
Master/Slave mode x
Ingress limit (I Series only) x
Egress limit (I Series only) x
Acceptable traffic (VLAN or
ALL)
xx
Input Filtering (On or OFF) x
Multicast MODE (A, B, or C) x
FC Length x
Jumbo x
Flow Control x x x
QOS Policy x x x
STP (with BPDU Cop) x
TABLE 6-8 ADSL Port Parameters for Profile Management (iMAP Devices Only)
Parameter iMAP 9x00
ADSL Line Type x
ADSL Mode x
Max. Interleave Delay x
Encapsulation Type x
Echo Cancel x
VPI x
VCI x
Maximum Upstream Rate x
Minimum Upstream Rate x
Maximum Downstream Rate x
Minimum Downstream Rate x
Enable IGMP Snooping x
ADSL Threshold values
(15Min LOFs, 15Min LOLs, etc.)
x
QOS Policy x
STP (with BPDU Cop)
TABLE 6-7 Comparison of Ethernet Port Parameters for Profile Management
Parameter Rapier Device Switchblade / 9800 Device
iMAP Device
(9x00)