User guide

Configuring Network Services Example Configurations for HVLAN, Translations
433
AlliedView NMS Administration Guide
FIGURE 6-44 Test Network VLAN Form (Finish to run Test)
FIGURE 6-45 Testing Results for the HVLAN Configuration
Extending this HVLAN configuration usually involves adding another iMAP 9000 device with service ports that support
multiple VLANs on its untagged ports. The steps are similar to the steps in 6.8.2, where the user usually creates a link to
another device from the VLAN Network node (in the example this would be the VLAN502[51] node). The user then right-
clicks on the device in the VLAN that has the new link and selects Extend VLAN. The link would be selected.