User guide

Configuring Network Services Example Configurations for HVLAN, Translations
431
AlliedView NMS Administration Guide
FIGURE 6-42 Selecting Links and Adding to the HVLAN Configuration
Clinking Next brings up the Configure VLAN Interfaces Form, as shown in Figure 6-43. For the iMAP 9000 devices, the type
must be changed to HVLAN, which the figure illustrates.
At this point the user can click on the Service Ports column and select which ports will included.
Note: Service ports that are part of an HVLAN configuration have restrictions, since they must be untagged. Moreover, once a port
is a member of any other VLAN (except 1), it cannot be added to the HVLAN configuration.