User guide

Configuring Network Services Example of Creating Network VLANs
425
AlliedView NMS Administration Guide
the devices that have service ports. In the example the service ports would be 11.0 Untagged for 172.16.33.11 and 0.6
Untagged for 172.16.33.18.
Click Next, and the Test Network VLAN form appears. This will test the connectivity between all three devices.Click Finish
and the Task Details form will show the tests and if they are successful, as shown in Figure 6-35.
To add the island-based Network VLAN for Sales, the same steps would be followed that would match Figure 6-29.
FIGURE 6-35 Sample Island-Based VLAN Successfully Tested
6.8.2 Extending the Island-Based VLAN
To extend the Network VLAN Training (VID=30), a device (172.16.32.13) will be added to 172.16.32.18, so another physical
link will be required between them. A service port will then be added to .18.
First, create a new physical connection. Select (shift-click) both devices, and then select Network Services -> Link Operations to
invoke the Layer 2 Links form. Click Add Links, and then choose from among the available links. as shown in Figure 6-36.