User guide

Configuring Network Services Creating Network VLANs
403
AlliedView NMS Administration Guide
FIGURE 6-10 Create VLAN Net Form - Modify Links
Any links that were selected from the Physical Map when the Wizard was started are displayed in the Vlan Path Links table
on this form. The available physical links from each device are listed in the Add Links subform. Selecting the desired link from
the Add Links list and then clicking Add Links (now active) will place the selected link as one of the VLAN Path links, as
shown in Figure 6-11.
Note: When a link from one device is added to the VLAN Path Links, the next device is selected in the Add Links subform. This
would follow the normal procedure of going to the next “hop” in the Network VLAN. This procedure allows one to “walk”
from one device to the next over the interconnecting physical links, resulting in a connected set VLAN interface that will form
the broadcast domain of the created VLAN.