User guide

Configuring Network Services Topology Maps and Inventory Tables
399
AlliedView NMS Administration Guide
FIGURE 6-7 Network Inventory for VLAN Interfaces
When the VLAN Interfaces Inventory table is the active panel and one row is selected, the VLAN Interface menu pull-down
appears and the following options are available:
• Configure VLAN Interface - This brings up the VLAN Interface Configuration form, and allows VLANs to be configured on
the individual device. This is the same form displayed when provisioning a device, and is described in 5.4.
• Extend VLAN - This is described in 6.4.
• Alarms/Events - This will invoke the Fault Management tables for Alarms and Events specific to the VLAN IF.
TABLE 6-2 VLAN Interfaces Inventory Table
Column Description
VLAN Interface
Name
The name of the VLAN interface on the device, which can be specified when creating a
Network VLAN using the GUI wizard. Refer to 6.3.1.
ID The VLAN interface ID (device name and VLAN ID).
Type The type of interface. Always VlanInterface in this inventory table.
IPAddress If the VLAN Interface is IP-based, its subnetwork.
NetMask The net mask for the subnetwork.
VID The VLAN ID number.
Status Alarm Status. If no alarms, the status is Clear.
Untagged Ports On the device, the ports that are labeled as untagged for the VLAN.
Tagged Ports On the device, the ports that are labeled as tagged for the VLAN.
Device The device name.
Network VLAN The network VLAN to which this VLAN interface belongs.