User guide

Controlling and Provisioning Network Devices Customer Cutover
386
AlliedView NMS Administration Guide
FIGURE 5-252 All Port Attributes Copied over to Target Ports
5.11.5.2 Physically disconnect/reconnect the iMGs to the new Ports
The user now disconnects the optic fiber from the FX10 port and connects it to the FX20 port.
Note: To connect the FX10 cable to the FX20 port, the user may need to change the cabling facilities.
The port is now active and is physically connected to the iMG/RG, but the iMG/RG must renew its IP address (if assigned
using DHCP) to update DHCP-based filtering on the iMAP port.
5.11.5.3 Force the iMG to perform DHCP Update
In the Task Details panel, select the appropriate iMG/RGs, and then click on the Update DHCP Client button. As the iMG/
RGs are updated, the Status changes to “DHCP Updated.” Refer to the following figures.