User guide

Controlling and Provisioning Network Devices Customer Cutover
384
AlliedView NMS Administration Guide
The user first brings up the Port Management Form for the source device and highlights the appropriate source ports, which
must be provisioned ports with a Customer ID, as shown in the following figure.
FIGURE 5-249 Selecting Source Ports for iMG/RG Cutover
The user then clicks on the Cut-Over Customer button. The Customer Cut-Over Panel appears, with the Source Device,
Ports, Types, and Customer IDs filled in.
The user selects the Destination Device from the pull-down (in this case the same as Source Device), which makes the ports
in the Dest column available for selection. The user has the option to select non-sequential ports, but in the example the
user has selected ports 0 through 5 on card 8. Refer to the following figure.