User guide

Controlling and Provisioning Network Devices Customer Cutover
380
AlliedView NMS Administration Guide
In most cases, the destination has a one-to-one mapping between ports on the card. However, the user is free to select
various destination ports, as shown in the following figure.
Note: Although the destination ports are valid since they are the same type, the NMS will produce an error message if the user tries
to transfer an Annexed port to a non-Annexed port.
FIGURE 5-246 Ability to Choose any Valid Destination Port
The user then selects the Provision Destination button. The NMS now validates the source and destination ports and
displays the status of the transfer as the task completes. Refer to the following figure.
FIGURE 5-247 NMS Provisioning the Destination Ports