User guide

Controlling and Provisioning Network Devices Port Management (iMAP Devices)
329
AlliedView NMS Administration Guide
5.6.30.5 Destroying the ATM Bonding Group
To destroy the ATM Bonding Group, go to the primary port in the Port Management table. Select De-provision Customer
Port, then choose Select All and De-provision. The Root port goes to Down and can now be provisioned for other
applications. Refer to the following figure.
FIGURE 5-197 ATM Bonding Group is Destroyed
Note: If the user selects the Provision New Customer/Port, the system will have a message window that it is selecting all bondable
ports. This is only for use if the port is to be part of an ATM Bonding Group; for other applications it is not needed.