User guide

Controlling and Provisioning Network Devices Port Management (iMAP Devices)
326
AlliedView NMS Administration Guide
5.6.30.2 Bonding Group - Viewing and Changing the Bonding Configuration
The General subtab for ATM Bonded ports gives information on both the ATM Bond and the ADSL members. Refer to the
following figure.
FIGURE 5-193 ATMBOND Tab
From this tab it is possible to enable and disable the ATM Bonding group, as well as add and remove ports to the bond. The
available options are:
• Remove Port - This allows you to remove the secondary port from the ATM Bonding Group. In the Confirm Delete
warning, selecting Yes drives both the Admin State and the Operational state of the Bonding group to Down.
• Add Port - This retrieves all ports that are not provisioned with a customer (no Customer ID) and opens a window to
allow adding another port to the group. You should select a port that has the same settings as the principle port (which
uses the settings of a bonded Profile). Once the port is added, the port will go to Up-Up. Click Enable to enable the
modified group.