User guide

Controlling and Provisioning Network Devices Port Management (iMAP Devices)
324
AlliedView NMS Administration Guide
Learned STB Multicast Info VID - The multicast VLAN
MAC - The STB MAC Addresses that were learned and are in the FDB
IP - The IP addresses being used for the multicast traffic
Note: These three attributes are placed in a table to allow the user to see the association
between a VLAN ID, MAC address, and its associated IP addresses.
Locked STB MAC Address: The set of unicast MAC addresses associated with this port.
The New Value pull-down allows the user to enter a new valid unicast address. This will
overwrite a Current Value if it exists.
The Remove option removes the current value and leaves the current Value field blank.
Note that several changes (add, change, remove) can be done for the MAC address rows.
These changes are activated when the Modify button is pressed.
Clear Entry Fields Clear any fields that have been datafilled but not yet Modified
Reset IGMP Counters Enabled if the port is in an Administrative State of DOWN, enables the port and so brings
the Administrative State to UP. If possible (for example, the card must be enabled), the
Operational State will change to UP.
TABLE 5-55 Video Tab (Continued)
Field/Button Description