User guide

Controlling and Provisioning Network Devices Port Management (iMAP Devices)
322
AlliedView NMS Administration Guide
5.6.26 Port Log Tab
Selecting the Port Log tab invokes a table that lists all the port-related management logs that have been generated. Refer to
previous sections on the port log tab. (5.6.16.15, 5.6.18.7)
For a description of management logs and the meaning of fields, refer to the iMAP Log / Troubleshooting Manual.
5.6.27 DHCP Tab
For each port configuration tab, there is a DHCP sub-tab that supplies:
• DHCP statistics
• ability to associate a DHCP Relay instance to the port
• ability to set to ON or OFF DHCP Filtering and Ageing
• a table that shows the MAC address, VID and IP address association.
The user can also clear the statistics (Reset Counters)
Note: The user should select/changed the DHCP Relay instance with care. Refer to the iMAP User Guide for details on DHCP Relay,
especially the difference between DHCP Relay and DHCO Snooping.
5.6.28 FDB Tab
For each port configuration tab, there is an Forwarding Database (FDB) sub-tab that shows the current VLAN ID (VID) and
MAC Address associations, as well as the status.
5.6.29 Video Tab
The Video tab highlights the IGMP / multicast attributes. Refer to the following figure.
Display The attribute that controls the display:
- Absolute Values
- Rate Per Second
- Million Per Second
Polling Interval: Current Polling Interval in seconds
New Interval: Sets a new interval for polling. This is set with the Reset Polling Interval button.
Add Historical Data from
NMS:
Adds the data collected previously from NMS port management
Add Historical Data from
Device:
Adds the data collected previously (buckets) from the device
TABLE 5-54 Stats Graph Tab
Field/Button Description