User guide

Controlling and Provisioning Network Devices Port Management (iMAP Devices)
319
AlliedView NMS Administration Guide
5.6.24.2 VDSL Configuration - VCs/VLANs Tab
This screen is determined by the mode of the port. If the port is in VDSL mode and using ATM, there is only a VPI/VCI of 0/
35 that cannot be changed. If the port is in VDSL mode and using PTM, there is no VCI, only a data channel. In ADSL mode,
the VPI/VCI follow the ADSL configuration (up to four VPI/VCI).
VDSL Configuration - Other Tabs
The remaining tabs follow the same concepts as the ADSL configuration. Refer to
5.6.16.
5.6.25 Statistics Tab
The statistics tab for an overall port are shown by clicking on the Statistics tab for the port. Refer to the following figures and
tables.
5.6.25.1 PMON Stats Tab
FIGURE 5-188 Statistics - PMON
Disable Enabled if the port is in an Administrative State of UP, disables the port and so brings the
Administrative State to DOWN. The Operational State will also change to DOWN.
Alarms Invokes the Alarm table of the Fault Management Object.
TABLE 5-53 VDSL Configuration Form, Rate Settings Tab (Continued)
Field/Button Description