User guide

Controlling and Provisioning Network Devices Port Management (iMAP Devices)
311
AlliedView NMS Administration Guide
FIGURE 5-184 Triple Play Form for SHDSL with Bonding Option
Using the Triple Play form, individual even numbered ports can be bonded to the next higher odd port. Therefore, when the
user selects an even numbered port, the “Bond To:” selector is enabled. Either the next port, or a blank entry, can be
selected. Provisioning will set the wire mode appropriately.
Note: Provisioning will first deprovision a port, which will automatically unbond it, then if necessary it will be rebonded.
As ports are bonded (or unbonded), the following occurs:
• When changing a port on the TriplePlay form, the odd port is removed from the list of ports that can be selected.
• Configuration changes are reflected in the Customer Ports table in Network Inventory.
5.6.22 View the EPON2 Port Configuration
The EPON2 port corresponds to the OLT on the EPON2 card that connects to up to 32 ONUs. The attributes are shown
on the EPON Port Management Form.