User guide

The AlliedView Network Management System (NMS) Levels of Support

AlliedView NMS Administration Guide

1.3.3 Specific Market Devices

Table 1-8 and Table 1-9 list the support features for the AlliedView NMS for other products. Each table cell can have the

following:

• Y(es): NMS supports the feature.

• N(o): NMS does not support the feature.

• - : The feature is not applicable for this device.

Note: Contact your Allied Telesis Customer Representative for detailed information on using these devices, since many of them fulfill

specific market requirements.

18.Provision/De-provision button under Port Management is disabled since Profile Management function is not

yet supported.

19.To display the LAG configuration on the Physical Network Map during discovery, LLDP must be enabled.

20.No alarm is generated after a cold or warm restart.

TABLE 1-8 Product Support Features for the AlliedView NMS

Support Features Juniper

Extreme

Summit

Extreme BD

Netscreen 208

Full Support -- - -

View Chassis -- - -

Provision -- - -

- Backup/Restore Y

- Command Script Mgmt. -- - -

- Configuration File Mgmt -- - -

- Device Information -- - -

- Device Log Management -- - -

- SNMP Agent -- - -

- SNMPV2 Configuration Y Y Y N

- SNMPV3 Configuration Y Y Y N

- Software Configuration -- - -

- Text File Comparison -- - -

- Configure VLAN -- - -

- Card, Port Management -- - -

- Syslog -- - -

- SSH N Y Y Y

WebGen Service -- - -

Network Services -- - -

- Link Operations -- - -

- VLAN -- - -

- Profile Mgmt -- - -

- QoS -- - -

- EPSR -- - -

- CES -- - -

LLDP Configuration -- - -