User guide
The AlliedView Network Management System (NMS) Levels of Support
15
AlliedView NMS Administration Guide
- Card, Port
Management
--- - - - -
Y
12
Y
12
Y
13
14
Y
13
N
- Syslog Y N N N N N N N N
Y
15
Y
16
N
- SSH Y Y Y N N Y Y Y Y
Y
17
YN
WebGen Service Y - - - - - - - - - - -
Network Service
- Link Operations - Y Y Y Y N N Y Y Y Y N
- VLAN - - - All All N N Y Y Y All N
- Profile Mgmt. - Y Y N N N N N N N
N
18
N
- QoS - Y Y N N N N N N N N N
- EPSR - - - N N N - N N N N N
- CES - - - - - N - - - - - N
LLDP Configuration N N N N N Y N Y Y N N N
LAG
19
N-- - - Y Y Y N N N
VCS Monitoring N - - - - Y - Y Y Y N N
Alarms/Events Y Y Y Y Y Y Y Y Y
Y
20
Y
20
N
Performance Y Y Y Y Y Y Y Y Y Y Y N
Browse Device Y Y Y Y Y Y Y Y Y Y Y N
Rediscover Device Y Y Y Y Y Y Y Y Y Y Y Y
1. Includes the AT-AR720, AT-AR725, AT-AR740, AT-AR745, AT-AR750s, and AT-AR770s
2. Includes the AT-AR415S, AT-AR440s, AT-AR442S
3. Includes the AT-8012, AT-8016F, AT-8024, AT-8026, AT-8088
4. Includes the AT-8516F/SC, AT-8524M, AT-8524POE, AT-GB, AT-8550SP
5. Includes the AT-9724, AT-9748
6. Includes the AT-8000S/16, AT-8000S/24, AT-8000S/24POE, AT-8000S/48, AT-8000S/48POE
7. Includes the AT-8000GS/24, AT-8000GS/24POE, AT-8000GS/48
8. Includes the AT-8100S/24C, AT-8100S/24, AT-8100S/24POE, AT-8100S/48, AT-8100S/48POE
9. Includes the 9000/28, 9000/28SP, 9000/52
10.If the devices are in stacked configuration and a SFP module is inserted to the stack member 2; the CLI command ‘show system
pluggable’ will not show SFP modules for stack members. If the device stack ID is not 0, Chassis View and Port Management shows
all ports are down. This is due to doing the SNMP GET of the ifOperStatus <portinterface> returns the value '2', which means
down. Finally, the incorrect LED turns green when an SFP module is inserted in the SFP port and its corresponding redundant RJ-
45 port is active.
11.Incorrect LED turns green when an SFP module is inserted in the SFP port and its corresponding redundant RJ-45 port is active.
12.Card management is not supported.
13.Provision/De-provision button under Port Management is disabled since Profile Management function will not be supported.
14.If the device stack ID is not 0, Chassis View and Port Management shows all ports are down. This is due to doing the SNMP GET
of the ifOperStatus <portinterface> returns the value '2', which means down
15.Supported, but unable to set Device Logs to disable. Moreover, syslog status cannot be disabled. Refer to Release Notes.
16.Syslog status on AT9000 cannot be disabled.
17.Open SSH prompts for the password twice.
TABLE 1-7 Product Support Features for the AlliedView NMS (Continued)
Support Features
AR
700
1
AR
400
AR
400s
2
AT-
8324
AT-
8xxx
3
AT-
85xx
4
AT-
9700
5
AT-
8000S
6
AT-
8000GS
7
AT-
8100S
8
AT-
9000
9
G6/
G2