User guide

Controlling and Provisioning Network Devices Port Management (iMAP Devices)
293
AlliedView NMS Administration Guide
5.6.19.1 DS1/E1 Port Tab
FIGURE 5-169 CES DS1 Port Tab (For E1, Label and Type are E1)
TABLE 5-45 CES DS1 Port Management - DS1 Port Tab
Field/Button Description
Device: / Port: Non-editable, this is the port (or ports) that are being displayed.
Admin. State/Status: Administrative State of the port. This depends on the state of the associated card.
Oper. State/Link Status Operational State of the port. This depends on the Administrative state of the port.
Status The same attributes as for other cards
Type: DS1 or E1
Interface Profile Name: The port profile being used. This is the first editable field.
Note: A profile must have been previously created.
Description (Customer ID) If an active DS1 port, the customer ID that was assigned
Timing Reference Where the port receives its clocking source from (SELF, CONNECTION, or CARD).
Profile The profile that was created and applied.
Line Encoding Either B8ZS or AMI (DS1), or AMI or HDB3 (E1). This should not be changed, unless
the card is being re configured.