User guide

Controlling and Provisioning Network Devices Port Management (iMAP Devices)
292
AlliedView NMS Administration Guide
5.6.18.7 POTS Port (Port Log Tab)
Selecting the Port Log tab invokes a table that lists all the port-related management logs that have been generated. Refer to
Figure 5-168. This window has the same columns as the ADSL Port Management window for Port Log.
For a description of management logs and the meaning of fields, refer to the iMAP Log / Troubleshooting Manual.
FIGURE 5-168 POTS Port (Port Log Tab)
5.6.19 CES8 Port (DS1/E1 Port Management Tabbed Form)
The DS1/E1 Port Management Form provides all the relevant information for both single and dual CES endpoints; when the
port is part of a dual endpoint configuration, the port dynamically changes so that both endpoints appear in the form.
Note: Refer to 6.16 for a walk-through of provisioning a dual endpoint.
TABLE 5-44 POTS24 Diagnostics Tab - POTS
Field/Button Description
Diagnostic Results Refer to the iMAP User Guide for an explanation of these test functions.
Diagnostic: Result For each test, there is a Result field that says PASS or FAIL and a Details field that
gives the specific test result.
Modify Test Tone For making changes to Test Tone settings. When changing state to ON, there is a
service warning.
Diagnose Interface This runs the diagnostics listed and gives the test results
Clear Diagnostic Results Clears any previous diagnostic results