User guide

Controlling and Provisioning Network Devices Port Management (iMAP Devices)
281
AlliedView NMS Administration Guide
FIGURE 5-160 SHDSL Configuration Tab - General - Bonded
TABLE 5-41 SHDSL Configuration Tab - General
Field/Button Description
WireMode Whether the port is 2-wire (Normal) or 4-wire (Bonded)
Admin. State/Status The Administrative State can be controlled and determines the Operational State. Refer
to 5.5.23. For a bonded pair, the Admin State determines the Oper. State of both wire
pairs.
Oper. State/Link State The ability of the port to provide service. The Administrative State must be up and then
the system determines if the port can provide service.
It is possible, in a bonded configuration, that one wire pair will be Up while the other pair
is Down. The line can still provide service, although at a lower rate. The user should check
for events/logs and fix the problem.
Port Up-Time Amount of time the physical interface has been in the UP-UP-Online state.
Status The status of the port that follows form the Administrative State and Operational State.
For meanings, refer to the iMAP User Guide, Section 4
- ONLINE
- IN TEST
- FAILED
- OFFLINE
- DEPENDENCY
- DEGRADED
- NOT INSTALLED
- INITIALIZATION REQUIRED
- TERMINATING
Wire Mode
Normal (2-wire) or Bonded (4-wire)
Connection State The connection state, such as Idle or Showtime