User guide

Controlling and Provisioning Network Devices Port Management (iMAP Devices)
261
AlliedView NMS Administration Guide
5.6.15.8 Ether-Like Port (Port Log Tab)
Selecting the Port Log tab invokes a table that lists all the port-related management logs that have been generated. This
window has the same columns as the ADSL Port Management window for Port Log.
For a description of management logs and the meaning of fields, refer to the iMAP Log / Troubleshooting Manual.
5.6.15.9 Ether-Like Port (DS3-SFP Tab)
Starting in release 12.0 for the iMAP 9000 series devices, a DS3 SFP is supported off of the GE3 and GE8 cards, which allows
a DS3 interface and a Gigabit Ethernet interworking function. For details, refer to 6.10.16.
5.6.15.10 Ether-Like Port (POE Tab)
To view and modify the settings of an Ethernet port that has POE configured, a POE tab is added, as shown in the following
figure.
FIGURE 5-142 Service Management GUI for POE
5.6.16 ADSL Configuration Tab
5.6.16.1 Status Tab
The Status Tab Form is shown in Figure 5-143.
Add Classifier Bring up the Add Classifier to Port Form. The data filled classifiers are listed, and the
user can chose one of these and can define the precedence.
Delete Classifier Deletes the classifier from the port
Reset Counters Reset the counters to 0
Command History Views the CLI commands and responses for the operations performed in the Port
Management application. This is the same for all tabs.
Close Closes the View Details application (the window as well as the tab). This is the same
for all tabs.
TABLE 5-35 Provision Port Form for Port Management - IP Filters Tab
Field/Button Description