User guide

Controlling and Provisioning Network Devices Port Management (iMAP Devices)
254
AlliedView NMS Administration Guide
Note: The Autonegotiation, Flow Control, Speed, and Duplex Mode fields appear according to the port type. (FX has Flow Control,
GE has Autonegotiate and Flow Control, FE has Flow Control, Speed, and Duplex Mode. Refer to the Feature Guide for
details.)
TABLE 5-30 Ether-like Port Management for iMAP Devices - General Tab - Upstream
Field/Button Description
Admin. State/Status: The Administrative State can be controlled and determines the Operational State.
Refer to 5.5.23.
Oper. State/Link State: The ability of the port to provide service. The Administrative State must be up and
then the system determines if the port can provide service.
Up-Time Amount of time the physical interface has been in the UP-UP-Online state.
Status: The status of the port that follows form the Administrative State and Operational
State. For meanings, refer to the iMAP Software Reference Manual.
- ONLINE
- IN TEST
- FAILED
- OFFLINE
- DEPENDENCY
- DEGRADED
- NOT INSTALLED
- INITIALIZATION REQUIRED
- TERMINATING
Port Type: For these Ethernet ports, Optical Fast Ethernet
Actual Flow Control: Whether Flow Control is on, regardless of how it was provisioned.
Actual Port Speed: The measured port speed versus what was actually configured
Actual Duplex Mode: The duplex mode actually attained
Description (Customer ID): An ID that can be given to uniquely identify the port.
Auto Negotiation: Whether certain port attributes are auto-negotiated with the remote peer.
Flow Control: The provisioned Flow Control
Egress Rate Limiter Whether Egress Rate Limiting has been applied
Untagged VLAN The VLAN that is applied if the packet has no VLAN id
Tagged VLANs The VLANs that are allowed on the port (packet has one of the VLAN IDs)
Direction Whether the interface is towards the network or customer.
Modify Enables the any changes have been made to the settings, makes them
Disable Disable the port (after a confirmation window). This makes the overall state DOWN.
Enable Enable the port. This makes the overall STATE UP if the port can be brought into
service.
Alarms Brings up the Alarm view for the selected port.
Clear Entry Fields Clears the writable fields of any values.
Command History Views the CLI commands and responses for the operations performed in the Port
Management application. This is the same for all tabs.
Close Closes the View Details application (the window as well as the tab). This is the same
for all tabs.