User guide

Controlling and Provisioning Network Devices Port Management (iMAP Devices)
250
AlliedView NMS Administration Guide
5.6.13 Add Derived Voice Line for GenBand (on Status Tab Form)
When the GenBand configuration is being used, the administrator can add a voice line immediately on the Status form by
clicking the Add Derived Voice Line button. The following form appears:
FIGURE 5-133 Add Voice Line Form (one MGC Device Configured)
If a voice line has already been configured, the MGCP Device and iMG/RG Voice Endpoint (DNS name) are already provided,
and the pull-downs should be filled in descending order, since one will drive what is available in the next pull-down. After
choosing Add, you should see an additional MGCP Line Info tab in the Voice Configuration form. The corresponding line in
the Voice Service tab in the iMG/RG form must then be enabled (by clicking the Enabled tic box for the New Line
Configuration).
If a voice line is being added for the first time, the available devices appear in the MGC Device pull-down. Once a device is
chosen, the user must input the MAC address of the iMG as well as the attributes from the remaining pull downs. Refer to
the following figure.