User guide

Controlling and Provisioning Network Devices Card Management
220
AlliedView NMS Administration Guide
5.5.12.4 POTS 24 Statistics Tab
Call Forwarding Busy
Sub-tab
ON-Prefix
ON-Suffix
OFF-Prefix
After CFW Busy has been activated, incoming calls are forwarded only if the
endpoint is busy, i.e., all lines are active.
Call Forwarding Busy
Sub-tab
ON-Prefix
ON-Suffix
OFF-Prefix
After CFW No Reply has been activated, incoming calls are forwarded only if
the endpoint does not answer before a pre-configured time-out.
TABLE 5-23 POTS24 Card Details - Statistics Tab for MGCP
Field/Button Description
MGCP Statistics Statistics supported for the MGCP application running on the POTS24 card are defined in
the ATN SNMP Enterprise MIB.
SentMessages: The total number of messages sent. This includes both commands and
responses.
RcvdMessages: The total number of messages received. This includes both commands and
responses.
LostMessages: The number of command messages for which responses were not
received.
CmdsRetransmitted: The number of commands that had to be retransmitted.
RcvdBadVersionMessages: The number of messages received that were discarded due to
the presence of an unsupported MGCP version number in the message.
UnrecognizedMessages: The number of messages received that were discarded because
they were unrecognizable as MGCP messages.
Interface Statistics These are the statistics from the Interface MIB. Refer to the MAP User Guide.
RMON Statistics These are the standard Ethernet-based statistics
Name Defined in the High Capacity RMON MIB (RFC3273 - etherStatsHighCapacityTable)
High Capacity Counts Name of high capacity counts, for example 63 Octet packets is the total number of
packets (including bad packets) received that were 64 octets in length (excluding framing
bits but including FCS octets).
Overflow The number of times the associated counter has overflowed. In iMAP MAP 4.1 these
should always be 0.
Reset MGCP Statistics Resets the MGCP statistics to 0.
Enable RMON Statistics Activated when the RMON statistics are disabled.
Disable RMON Statistics Activated when the RMON statistics are enabled.
Reset RMON Statistics Resets the RMON statistics to 0.
Download Brings up the Download Software window. Refer to 5.5.22.
TABLE 5-22 POTS24 SIP Attributes - (Defaults are in Bold) (Continued)
POTS24 Card Attribute Description