User guide

Controlling and Provisioning Network Devices Card Management
210
AlliedView NMS Administration Guide
FIGURE 5-106 CFC24 Card Details (Duplex)
TABLE 5-17 CFC24 Card Details
Field/Button Description
Device The device name and the slot number for the card (2,4 for the iMAP n400, 8-9, 12-13 for
the iMAP n700 in duplex mode.
Admin. State If UP, the CFC24 is capable of providing service. In Duplex mode both CFCs should be UP.
If DOWN, can Schedule Diags.
Oper. State The CFC24 is providing service. This state is not controllable but depends on the Admin.
State. In Duplex mode both CFCs should be UP.
Status The current state of the card. States can be static or dynamic (transition of state such as
Initializing or Running Tests). In normal operation CFC24 cards should be ONLINE for both
simplex and duplex.
Profile The profile used to provision the card. The only selection is manual, since when a profile for
a card type is set to AutoProv, the card will automatically provision itself wen inserted in
that slot.
Preferred Load This is the software that will load when the card restarts. In normal operation this should be
the same as the running load, and includes the software that will download to the other
cards. This load will be different during software upgrades.
Temporary Load This is software that will load the next time the card restarts, and is part of the software
upgrade process, so this is usually empty.
Alternate Load An alternate load file.
Running Load The software that is currently on the FLASH of the card. For duplex in normal operation,
the loads should be the same.
Diags. Result Shows the status and results of diagnostics set by using the Schedule Diags. button. For the
iMAP 9400 and iMAP 9700 in simplex mode, these are run with the card in service. For the
7700 in duplex mode, these are run on the inactive CFC24.