User guide

Controlling and Provisioning Network Devices Card Management
206
AlliedView NMS Administration Guide
5.5.3 GE3 Card
After selecting a GE1, the user can select View Details, which provides specific information on the card and includes some of
the same options available on the Card Management table. Refer to Figure 5-103 and Table 5-15.
FIGURE 5-103 GE3 Card Details
Preferred Load For cards that have software loads, this is the software that will load when the card restarts.
In normal operation this should be the same as the running load.
For the GE1 card this field does not appear. Refer to 5.5.23.
Create Creates the card in the provisioning data. The Card Management window will refresh and
the card will come up in a state of UP-DOWN-NotInstalled. (Refer to the Status column in
Table 5-13.)
Cancel Dismisses window.
TABLE 5-15 GE3 Card Details
Field/Button Description
Device The device name and the slot number for the card (0 or 1 for the iMAP 9400, 10 or 11
for the iMAP 7700.
Admin. State If UP, the GE1 is capable of providing service. If DOWN, can Run Diags.
Oper. State The GE1 is providing service. This state is not controllable but depends on the Admin.
State.
Status The current state of the card. States can be static or dynamic (transition of state such as
Initializing or Running Tests).
TABLE 5-14 Create Card Details
Field/Button Description