User guide

Controlling and Provisioning Network Devices Configure VLAN (Chassis View)
198
AlliedView NMS Administration Guide
FIGURE 5-95 VLAN Configuration Screen (iMAP Device)
The following table gives an overview of the fields, graphics, and buttons available.
TABLE 5-12 VLAN Configuration Options
Screen Item Description
Create If creating a VLAN on the device, select this button first. You will see a Create New VLAN form. Fill
in the Name and ID, and then click OK, and the VLAN is added to the Vlan Interfaces pull-down.
Vlan
Interfaces
The VLAN interfaces available on the device. This includes all VLAN interfaces.
IP Address
and Subnet
If this Vlan interface is part of an IP-based Network VLAN, this is included. The format is the IP
address and the subnet mask. The subnet can be specified by a forward slash and the mask as a
number of bits (e.g. /24) or by a space and the full dot notation (e.g. 255.255.255.0).
Untagged
Ports
For the selected VLAN interface, the ports that are reserved. On the graphic, these have the capital
letter U.
Tagged Ports For the selected VLAN, the ports that are reserved and active. On the graphic, these have the capital
letter T.
Translated
Port
For the selected VLAN, allows the user to specify the VLAN on the customer side of the port that
will be translated into the selected VLAN. When selecting X, the user will see a pop-up window that
allows the user to input the translate from ID. Once entered, these have the graphic capital letter X.
VC-0 through
VC-3 buttons
When more than one VC has been associated with a VLAN, each button, when selected, show the
VLANs which have that VC provisioned. (This is for iMAP devices only.)