User guide

Controlling and Provisioning Network Devices Provisioning a Device
185
AlliedView NMS Administration Guide
To delete the test results, select one or more tests form the Test Results panel, right click, and select Delete Test Result.
(Note that View Test Result is grayed out.) Refer to the following figure.
FIGURE 5-78 Deleting MPEG Test Results
To modify the schedule/recurrence of a test, select Tools -> View Tasks, and select the Task Name (the Name entered for the
test) form the View Tasks table. Select View Details, and then the Modify Schedule button. Note that only the time of the
test, not the other attributes, can be changed.
The steps to delete an MPEG test is similar to modifying its schedule. Select the Task Name (in this case
Sample_MPEG_Test) and Click on Remove. This does not remove the results that the test produced; however, every day
test results older than seven days are removed from the database.
To clean up the MPEG tests that have been run on multiple iMGs/RGS, the button Clean up MPEG Tests has been added in
release 10.0 SP2. The user selects the iMGs/RGs, and the button is activated. When selected, the Clean up MPEG Tests panel
appears, with the iMGs/RGs listed. The user can then select Finish to perform the clean up immediately, or Next to bring up
a schedule. Refer to the following figure.
Note: These tests are usually ones that have failed for some reason, or been saved.
FIGURE 5-79 MPEG Test Clean Up Panel