User guide

Controlling and Provisioning Network Devices Provisioning a Device
177
AlliedView NMS Administration Guide
FIGURE 5-67
• Show LAG Links option - Right click on the LAG links icon and select Show LAG Links to bring up the LAG/VCS screen.
Refer to the following figure.
FIGURE 5-68 Accessing the Show LAG Links Screen
• LAG/VCS screen - This shows details such as the number of links that make up a LAG, the status of each LAG member,
the port ID and LAG ID of each link, and, if VCS is configured as well, which stack member a LAG member is connected
to. It also shows the endpoints, which can be non-stacked or stacked. Non-stacked endpoints have the same icon as for
devices in the Physical Network Map. Stacked endpoints are shown as a stacked node, with each node representing a
stack member. (Members are sorted from lowest to highest ID.) Finally, each link of the LAG is shown, where a link that
is UP is green, and a link that is down or unavailable is shown as orange. Refer to the following figure.