User guide

Controlling and Provisioning Network Devices Provisioning a Device
175
AlliedView NMS Administration Guide
FIGURE 5-64 LLDP MultiDevice Wizard for Single Device Options - Second Panel
To configure the many possible options, the following concepts are used:
• ALL Ports row - This row controls multiple actions as follows:
• Mode - Selecting this cell brings up a pull-down of Modes, and selecting one means selecting the Mode for all ports on
the device, including OFF, which disables LLDP for all ports.
• Notify - Selecting this tic box toggles the Notify option for all ports between All On (with all ports in the column
having the tic boxes checked) and All Off (with all tic boxes in the column blank).
• All options - This allows the user to add all options to all ports or delete all options from all ports.
• Specific option - For each option, selecting the tic box will Add or Delete the option for all ports.
• Row for each port - This row controls the options for each port as follows:
• Mode - Selecting this cell brings up a pull-down of Modes, and selecting one means selecting the Mode for only that
specific port.
• Notify - Selecting this tic box toggles the Notify option on the port between ON and Disable.
• All options - This tic box controls the state of all the options on the port
• Specific Option - selects the specific option for the specific port.
Note: Setting any specific option for a will override a global options.
The user can then select Finish to bring up the Task Details window or Next to bring up the Task Schedule window.