User guide

Controlling and Provisioning Network Devices Provisioning a Device
166
AlliedView NMS Administration Guide
If the type selected from the combo box already exists in the load, its row in the table above will be highlighted and its details
will be defaulted to their existing values.
Push the Add button after entering all the details and verify the new type is added to the table. If you do anything else instead
of pushing the Add button, a popup dialog will ask whether or not to finish the addition for the device.
The Modify button allows modifying the details of a type. Select the type either via the table or the combo box, modify the
file names, and then push Modify. If you do anything else instead of pushing the Modify button, a popup dialog will ask
whether or not to finish the modification.
The Delete button allows deleting a type from the load. Select the type to delete using either the combo box or the table,
then push Delete.
More than one Details dialog can be displayed at the same time so Load contents can be compared and values can be copied
and pasted from one load to another (using ctl-c and ctl-v).
Note: Displaying details and modifying the same load in more than one simultaneous dialog, however, is not recommended. The
changes to the load will occur as they're made, but all the dialogs will not be refreshed as they occur.
FIGURE 5-53 Load Details Form - Selecting a New Type