User guide

Controlling and Provisioning Network Devices Provisioning a Device
152
AlliedView NMS Administration Guide
5.3.9.2 Modifying Software Configuration
The table shows for the selected devices all of the filetypes for the devices. When the user selects the devices and clicks
Modify Release Configuration, the Modify Release Configuration form appears, as shown in the following figure.
Caution: For the devices that will receive downloads, do not set their telnet idle session time-out to any value less than 6 minutes. This
minimum is needed to ensure the NMS is aware the download is complete and can proceed with any further steps.
Note: If a custom load has been built (refer to 5.3.10), it will be added to Loads pull-down.
FIGURE 5-40 Modify Software Device Configuration Panel