User guide

Controlling and Provisioning Network Devices Provisioning a Device
145
AlliedView NMS Administration Guide
FIGURE 5-31 SNMP Agent Panel
To modify the agent for one or more devices, select the rows, and then click Modify (now active). The following figure
appears.
FIGURE 5-32 Configure SNMP Agent Panel
The following table lists the options available.
TABLE 5-8 SNMP Agent Fields
Option Description
Agent status A checkbox to enable or disable the device(s). A dark check means all selected devices have this
feature enabled, an unchecked box means no devices have this feature enabled, and a gray
checkbox means some devices have this feature enabled and some devices do not.
Authentication
failure traps status
A checkbox to enable or disable the create traps when an unauthorized attempt has been made.
Link up/down trap
generation (all
interfaces)
A checkbox to set each interface to send (checked) or not send (not checked) a trap when its
up/down state changes. A gray box means no changes are made.
OK Applies the changes.
Cancel Cancels the changes made in this window.
Help Invokes online help.