User guide

Controlling and Provisioning Network Devices View Chassis
122
AlliedView NMS Administration Guide
Note: For the AT-x610, stacking will not start until after the unit has been booted and the stack-XG card has already been inserted.
If the card is removed (or is replaced), and the x610 is not rebooted, the chassis view shows a duplicate image.
5.2.2 Display of VLAN-based HVLANs (Tunneling)
For the iMAP and SBx3100, an outer tag can be applied for certain ethernet-based cards, allowing an outer VLAN to be
applied to several customer interfaces. The NMS cannot be used to create these, but the chassis view does show where
these tunneling-type HVLANs are located. Refer to the following figure.
FIGURE 5-6 Tunneling VLANs Displayed on Chassis View