User guide

Controlling and Provisioning Network Devices View Chassis
121
AlliedView NMS Administration Guide
• Card is installed but not provisioned - The card appears grayed-out and has the label “NOT PROVISIONED” across the
front as shown in the following figure.
FIGURE 5-3 An Example NOT PROVISIONED Card in the Chassis View
• Unknown card - When the chassis view detects a card that is not supported, it displays the board with an “Unknown
Board” image. Refer to the following figure.
FIGURE 5-4 An UKNOWN Card in the Chassis View - AT-AR720 Device
FIGURE 5-5 Tooltip for an Unknown Board Image
Like the Rapier product chassis view, this view also has the Refresh and Exit options, while the Applications pull-down has
the VLAN Interface Configuration option.
The Polling pull-down is a toggle function to Start or Stop Poll Pollers; the pollers allows port information to be polled for
the device so the port status can be updated. Along the bottom of the Chassis View is the date/time when the switch ports,
card states, and alarms were last polled. As each is updated, each will replace the previous poll result.
Note: Polling is suspended while Vlan data is retrieved or updated.