Installation guide

Installing the AT-8400 Chassis
18
To attach the frame ground, perform the following procedure:
1. Use a crimping tool to affix the cable lug to one end of the 12 AWG
bundled or 14 AWG solid ground wire.
2. Remove the 4M nut from the frame ground connector on the back
panel of the AT-8400 chassis.
3. Attach the ground wire to the frame ground connector on the
AT-8400 chassis and secure with the 4M nut removed in Step 2.
4. Attach the other end of the ground wire to an appropriate ground
(earth).