User`s guide

Section II: Local and Telnet Mangement

Link

The status of the link between the port and the end

node connected to the port.

Possible settings for this parameter are:

• Up - indicates that a valid link exists between the port

and the end node.

• Down - indicates that the port and the end node have

not established a valid link.

Speed

The operating speed of the port.

Possible settings for this parameter are:

• 10 Mbps = 10 MB

• 100 Mbps = 100 MB

• 1000 Mbps = 1 GB (Optional uplink ports only)

Duplex

The duplex mode of the port.

Possible settings for this parameter are:

• Half-duplex

• Full-duplex

PVID

The port VLAN identifier assigned to the port.

FlowCtrl

The flow control setting for the port.

Possible settings for this parameter are:

• Enable

• Disable

STP_State

The current operating STP status of the port.

Possible settings for this parameter are:

• Disable

• Blocking

• Listening

• Learning

• Forwarding

PARAMETER DESCRIPTION