User`s guide

Section II: Local and Telnet Mangement
64
Displaying Port Status
To display the status of the ports on the switch, perform the following
procedure:
1. From the Main Menu, type 1 to select Ports Menu.
The Ports Menu in Figure 17 is displayed.
Figure 17 Ports Menu
2. From the Ports Menu window, type M if you want to select a module
in the stack other than the one currently displayed.
The following prompt is displayed:
Select Module ID: [1 to 8] ->
3. Enter the ID of the module you want to select, and press the Enter key.
4. From the Ports Menu window, type 4 to select Port Status.