User`s guide

AT-S25 Management Software User’s Guide
225
Deleting a Port Mirror
To delete a port mirror, perform the following procedure:
1. From the Home page, select Configuration.
2. From the Configuration page, select Layer 1.
3. Select the Port Mirroring tab.
The Port Mirroring window in Figure 91 on page 224 is displayed.
4. Click the Enable Port Mirroring check box. This removes the check from
the box.
5. Click Apply.
Port mirroring is now disabled on the stack. The port that was
functioning as the destination port can now be connected to an
end node for normal network operations.