User`s guide

AT-S25 Management Software User’s Guide
145
Switching the VLAN Mode
To switch a VLAN’s mode from Tagged to Basic, or vice versa, perform
the following procedure:
1. From the Main Menu, type 5 to select System Config Menu.
The System Config Menu in Figure 47 is displayed.
Figure 55 System Config Menu
2. Type 1 to select Switch Mode and press the Enter key.
The prompt message is displayed:
The switch will be rebooted after changing the
switch mode.
Do you want to continue? (Y/N):
3. Type Y to accept the change, or type N to cancel.