Installation guide

AT-S25 Management Software Release Notes
613-50514-00 Rev A 9 Allied Telesyn, Inc.
The Send File pop-up window in Figure 6 is displayed.
Figure 6 Send File Pop-Up Window
15. Click the Browse button to specify the location and the file to be downloaded onto the
switch.
16. Click on the Protocol filed and select the transfer protocol as either Xmodem or, for faster
download, 1K XModem.
The image file you are downloading is “ATS25_V202.IMG”.
17. Click Send.
The software immediately begins to download onto the switch. The Xmodem File Send
window in Figure 7 displays current status of the software download. The download
process take a couple minutes to complete.
Figure 7 XModem File Send Window
Once the download process is completed, the following prompt is displayed:
XMODEM transfer has successfully completed. Now writing to
Flash PROM.
Please wait for FLASH writes to complete.
This may take up to 1 minute.
Do not reset, do not remove power.
The system will automatically reboot.