Installation guide

AT-S25 Management Software Release Notes
613-50514-00 Rev A 8 Allied Telesyn, Inc.
8. Click the Configure button. The Properties window of the connecting COM is displayed.
Figure 4 COM1 Properties Window
9. From the Bits per second pull-down list, select 115200; and click OK. You are returned to
the AT-S25 Properties.
10. In the AT-S25 Properties window, click OK. You are now returned to the ATI Diagnostics
menu in the HyperTerminal window.
11. From the local management interface menu, select Connect from the Call menu or click the
Call icon .
12. In the HypterTerminal window, hit any key to activate the ATI Diagnostics menu.
13. In the ATI Diagnostics menu, type X to select XMODEM download updated System Software,
and press the Enter key.
The following prompt is displaying, indicating that the system is ready for the
download:
The System is now ready for download. Please start your XMODEM
transfer.
14. From the HyperTerminal main window, select the Send icon or select the Transfer
menu, and then select Send File... from the pull-down menu, as shown in Figure 5.
Figure 5 Local Management Window - Send File Menu