Installation guide

AT-S25 Management Software Release Notes
613-50514-00 Rev A 7 Allied Telesyn, Inc.
3. Immediately hit any key to run the system diagnostics. The ATI Diagnostics menu in Figure
2 is displayed.
Figure 2 ATI Diagnostics Menu
The current terminal speed is 9,600 baud. For faster transfer, select the highest
speed available.
4. Type Z to change the terminal speed.
5. Type 5 to select the new speed at 115200.
6. From the local management interface menu, select Disconnect from the Call menu or click
the Disconnect icon .
7. From the local management interface menu bar, select Properties from the File menu or click
the Properties icon . The AT-S25 Properties window in Figure 3 is displayed.
Figure 3 AT-S25 Properties Window