Installation guide

AT-S25 Management Software Release Notes
613-50514-00 Rev A 5 Allied Telesyn, Inc.
Using TFTP to Download the AT-S25 Version 2.0.2 Image File to the Master Switch of the
Stack
In a network consisting of several AT-8316F or AT-8324 switches, you could simplify the
upgrade procedure with the two-step process below:
❑ First, download Version 1.5.6.3 image file “ATS25_V1563.IMG” to the Master switch of the
stack.
❑ Secondly, download Version 2.0.2 image file “ATS25_V202.IMG” to the Master switch of
the stack. In turn, the Master switch will automatically download the new image file to
all the Slave switches.
To download the AT-S25 Version 2.0.2 image file to the Master switch, the process is as follows:
1. Download the AT-S25 Version 1.5.6.3 image file to the Master switch via TFTP.
2. Make sure that the source image file you are downloading is for Version 1.5.6.3
“ATS25_V1563.IMG”.
After Version 1.5.6.3 is downloaded to the Master switch; the Master switch in turn will
download the image file of this version to all the Slave switches in the stack when it
boots up.
When it is rebooted, verify that the current software version is “1.5.6.3”, and that all the
Slave switches also booted up correctly.
3. Download the source image file for Version 2.0.2 “ATS25_V202.IMG” to the stack via TFTP.
4. Allow the stack to reboot automatically.