Installation guide

AlliedWare Plus Version 2.2.4.0 Software Release Notes
PN 613-001748 Rev A 2 Allied Telesis, Inc.

AT-8100S/48*
 AT-8100S/48POE*
*The AT-8100S/48 and the AT-8100S/48POE switches are not supported in stack mode.
Product Documentation
See the Allied Telesis web site at www.alliedtelesis.com for the latest versions of the product
documentation.
For hardware installation instructions, see one of the following documents:
 8100L and 8100S Series Fast Ethernet Switches Stand-alone Installation Guide
 8100S Series Fast Ethernet Switches Stacking Installation Guide
For descriptions of software features and procedures, see the following document:
 AlliedWare Plus Version 2.2.4 Management Software Command Line Interface User’s Guide
Operational Notes
The following operational notes apply to both standalone and stacked switches.
 AT-8100/48 and AT-8100/48PoE: AT-8100/48 and AT-8100/48PoE switch models are not
supported in stack mode at this time.
 802.1x: In order for multiple supplicant dynamic VLANs to function, the native VLAN must be
set to VID 1.
 802.1x: Re-auth is not supported.
 802.1x: 802.1x is not supported on VLAN trunked ports or access ports that have Voice
VLANs enabled.
 Access Control Lists on VTYs: VTY ACLs are not supported in stack mode.
 Auto-QoS: Auto-QoS is not supported in stack mode.
 DHCP Snooping: DHCP Snooping is NOT supported in stack mode.
 DSCP-queue mapping: Per interface, DSCP-queue mapping cannot be changed on stack
IDs greater than 1.
 Enhanced Stacking: Enhanced Stacking feature is not supported in stack mode.
 Flow control: Flow control is not supported on combo ports.
 IGMP Snooping: IGMP Snooping is no longer enabled by default.
 IGMP Snooping: Only the first group in an IGMPv3 report containing more than one group will
be processed.
 IGMP Snooping Querier: IGMP snooping querier should not be used if there is another
querier on the network. If multiple AT-8100 switches are connected at Layer 2, IGMP
snooping querier must only be enabled on ONE switch per VLAN.
 MAC Authentication: Multiple Host Dynamic VLANs are NOT supported.
 MAC-based VLANs: MAC-based VLANs are not supported in stack mode.
 MAC-based VLANs: The switch supports 256 MAC-based VLANs.
 MSTP: MSTP is NOT supported in stack mode.