Installation guide

AT-S39 Version 3.0.1 Management Software Release Notes
PN 613-50389-00 Rev A 7 Allied Telesyn, Inc.
New AT-S39 Version 3.0.1
New Features
• TFTP from a Local Management Session
You can now use TFTP, in addition to the Xmodem protocol, to download and upload
files from a local management session.
• Clearing the Statistics Counters from a Web Browser Management Session
You can now clear the statistics counters from a web browser management session.
• Validation of Configuration Files
The AT-S39 management software adds validation information to a switch’s configuration
file when the file is uploaded to a workstation or server. The software will check for this
validation when a configuration file is downloaded onto a switch. If the validation
information is missing in the configuration file, the download is canceled. This feature is to
prevent corrupted configuration files from being downloaded onto a switch.
Note:
This feature was added to Version 3.0.1. Configuration files from AT-8000 Series switches
running earlier versions of the management software cannot be downloaded onto a
switch running this software version.
• Class of IP Address and Subnet Mask
In previous versions, a switch’s IP address and the subnet mask had to be of the same IP
address class. The addresses can now be of different classes.
• IP address and Default Gateway
In previous versions, the network ID portions of a switch’s IP address and the default
gateway had to be the same. The addresses can now be of different classes.
• Broadcast Frame Timer Interval for 10, 100, and 1000 Mbps Ports
In previous versions, there were three broadcast timer intervals, one for each port speed.
In this version, there are two: one for 10 and 100 Mbps ports and another for 1000 Mbps
ports.
• New SHOW USER Command
This new command line interface command displays the account name under which
you logged on to switch. The format of the command is:
SHOW USER