Installation guide

AT-S39 Version 3.0.1 Management Software Release Notes
PN 613-50389-00 Rev A 5 Allied Telesyn, Inc.
The Send File window in Figure 3 is displayed.
Figure 3 Send File Window
8. Click the Browse button and specify the location and filename of the new AT-S39 software
image.
9. Click the Protocol field and select as the transfer protocol either Xmodem or, for a faster
download, 1K XModem.
10. Click Send.
The software immediately begins to download onto the switch. The Xmodem File Send
window in Figure 4 displays current status of the software download. The download
process takes a couple minutes to complete.
Figure 4 XModem File Send Window
The switch begins to initialize the software after it is installed, a process that takes
approximately 1 minute to complete.