Installation guide

AT-S39 Version 3.0.1 Management Software Release Notes
PN 613-50389-00 Rev A 17 Allied Telesyn, Inc.
Console Timeout Value
The following changes have been made to the console timeout value:
- A new timeout value is activated immediately on the switch. Resetting the switch to
activate a change is no longer necessary.
- The console timeout value now also applies when logging in to a management session.
If a password is not entered after the specified period of time, the log in is canceled.
This prevents future management sessions from being blocked.
Resolved Issues
Inactive MAC Addresses
The switch would periodically fail to delete inactive MAC addresses from the MAC address
table. This problem has been resolved.
PVID and Port Reconfigurations
The management software would periodically change a PVID after a change had been
made to a port’s configuration (such as to its speed or duplex mode). This problem has
been resolved.
Starting a Web Browser Management Session
You no longer need to refresh the web browser window if you enter an incorrect login
name or password when starting a web browser management session. You can now try to
log in again without having to refresh the window.
Password Verification
The management software would periodically fail to verify the entire password when a
network administrator logged in. This problem has been resolved.
Mirror Port in a Trunk Port
The management software no longer allows a trunk port to include a port functioning as a
mirror port.
Untagged Ports and the Default VLAN
The management software did not always return untagged ports to the Default VLAN
when ports were removed from a VLAN or a VLAN was deleted. This problem has been
resolved.