Installation guide

AT-S39 Version 3.0.1 Management Software Release Notes
PN 613-50389-00 Rev A 16 Allied Telesyn, Inc.
• Default Values
Not all switch values were returned to their default values when the Reset to Factory
Default option was selected. This issue has been resolved.
• STP and Port LED
A port’s LED would continue to blink after the cable had been disconnected if the port was
in the STP blocking state. This issue has been resolved.
• Default VLAN and PVIDs
The PVID of a port was not set correctly if it was moved to the Default VLAN as an untagged
port. This issue has been resolved.
Previous Version 1.4
New Features
• Enhanced Stacking
The enhanced stacking feature is now supported on all AT-8000 Series switches.
• Password Encryption
The management software now features password encryption in the switch configuration
file. This protects your password should someone upload and view the file. A switch’s
password is maintained when a unit is upgraded to AT-S39 Version 1.4. Consequently,
password encryption is not initiated until you assign the switch a new password after you
have upgraded it.
• SNMP Management Access
You can now disable SNMP management access and so prevent individuals from
managing the switch with an SNMP application. For instructions, refer to the AT-S39
User’s Guide.
• Allied Telesyn Enterprise MIB
This version supports the complete Allied Telesyn switch MIB for SNMP remote
management.
• Resetting a Switch from a Web Browser Management Session
You can now reset a switch from a web browser management session. For instructions,
refer to the AT-S39 Version 1.4 User’s Guide.
• Diagnostics Menu
The Diagnostics menu now includes the build dates and times for both the AT-S39
software and the bootloader.